Tips and tricks

  1. Work without pressure! QIXER Shine does the work for you!
  2. Make sure the shoe cream is applied in a thin, even layer. You can then immediately give your shoes a good shine without having to wait.
  3. After opening a cream-impregnated sponge for the first time, you should use it up within 6 to 8 weeks to prevent the cream from drying out through natural condensation.
  4. You can operate Qixer Shine both with the battery (completely mobile) or from the mains. Make sure that you have a sufficient number of attachments within reach.
  5. After use, simply leave the polishing attachment on the device. For when you are in are hurry, a quick re-polish is normally sufficient to freshen up the shine on your shoes.
  6. Replace attachments in good time to ensure an optimal effect. Replace the cream-impregnated sponges when no cream can be seen on the leather after an application. Replace the polishing attachment as soon as it is dirty and no longer polishes as well.
  7. Store the device near your shoes so that you always have it handy.
  8. Recharge the batteries fully as soon as you notice a drop in performance. Please note that full performance can only be guaranteed when the batteries are fully charged.
  9. If the batteries are completely empty and you recharge them, please wait 60 minutes before switching the appliance on again to achieve a good cleaning result.
  10. If the appliance is not used for several months, we recommend charging the batteries fully from time to time (approx. every 4 months). This helps to maximize the charging capacity of the batteries.
  11. Do not leave the appliance completely uncharged over a longer period of time. When it is empty, it should ideally immediately be plugged into the mains again.